You are here: Application Areas Annealing Line
JA slide show

Annealing Line

E-mail Print PDF

Annealing-LineThe cold rolling process in the reducing mills produce undesirable hardness in the sheet steel and this is relieved in annealing furnaces. The annealing furnaces can be of the covered type, where entire coils are stacked one above the other and heated in a covered furnace, or continuous type where the strip is uncoiled and passed through a multi-zone furnace and again coiled up at the furnace exit. The annealing lines may be incorporated with a pickling section to remove oil and grease remains of the cooling fluids used in reducing mills.

Low energy consumption, high production rates and gentle strip treatment along with top quality are the main features of our annealing lines.

Application of Annealing :-

Annealing and pickling lines for stainless steel and electric strip

Bright annealing lines for stainless steel

Annealing and decarburization lines for electric strip

DC Drives:

  • Incoming Voltage: 230- 1000VAC ;
  • Incoming Frequency: 50/60Hz (Variation: 48-62Hz) ;
  • Outgoing Amperes: 25-5150A DC ;
  • Ambient: 0-50 Deg C ;
  • Ampere range: 25A to 5200A ;


AC Drives:

  • Incoming Voltage: 200-230 VAC( +10% -15%), 380-500VAC (+10% -15%)
  • Incoming Frequency: 50/60 Hz, +/-5%
  • Ambient: 0-45 Deg C ( 0-40 Deg C with Ip40 Cover)
  • Power range: 0.5KW to 2900KW