You are here: Application Areas Pickling Line
JA slide show

Pickling Line

E-mail Print PDF


pickling-lineIn the Process Lines either the surface of the sheet steel is treated, or the crystal structure affected or the incoming coil trimmed on sides, or slitted longitudinally, or sheared into strips of definite lengths.

Pickling Line

VSM Venture Control Systems has commissined Push-Pull, semi-continuous and continuous pickling lines.

The material from the Hot Rolling Mills is generally descaled and chemically treated by passing it through a bath of hydrochloric or sulphuric acid and rewound into coils to be sent to the reducing mills.

Our engineering ensures maximum utilisation of the acid for pickling and least wastage through effluents, thus resulting into low consumption of acid per ton of production. Efficient recycling of acidic water in the system reduces drastically the consumption of water per ton.

Additional Features:

Additional features like Edge-Trimming, Skin-Passing, Coating,Cut-To-Length etc. can be incorporated as per the requirements of the customer.

DC Drives:

  • Incoming Voltage: 230- 1000VAC ;
  • Incoming Frequency: 50/60Hz (Variation: 48-62Hz) ;
  • Outgoing Amperes: 25-5150A DC ;
  • Ambient: 0-50 Deg C ;
  • Ampere range: 25A to 5200A ;

 

AC Drives:

  • Incoming Voltage: 200-230 VAC( +10% -15%), 380-500VAC (+10% -15%)
  • Incoming Frequency: 50/60 Hz, +/-5%
  • Ambient: 0-45 Deg C ( 0-40 Deg C with Ip40 Cover)
  • Power range: 0.5KW to 2900KW